 Rebuilding
service for ignition
units  |
 |
|
|
Want to keep your
ignition system
absolutely stock looking, or just save some money? Our new
stainless steel Stockboxes will
look great for decades, but if you
prefer, we can put new parts in your old original housings for about
half the price of our new stockboxes, if you remove the old parts and
potting compound. It's not easy, but with a heat gun and a
small
screwdriver, you can dig out the old contents (We wear leather welding
gloves to hold the box, and use caution to keep the screwdriver blade
in the potting compound and not our hands). Next, prepare the
finish as you want it to be. Bead blast it, prepare it for
painting,
send
it out for plating, leave it as-is, whatever you
want. Then
send it to us, and we'll put new parts in it and return it to you ready
to go, with the same specifications as our new stainless steel units.
Clip off the wires from your rectifier unit flush with the potting compound, and the wires from one of your CDI units, also flush, and send them along with the empty housings. We will then be able to copy your wire lengths and sleeving to match the style you have (it varied). We will also reuse your 3-pin rubber connector from the rectifier unit, and your set will look like new! Replacing the circuitry
and wiring
for either an H2/H1D CDI box or a rectifier
box is $49 each, and we'll do a set of three H2/H1D CDI boxes and one
rectifier box for $175.
|
 |